New Voronoi Diagram Algorithm of Multiply-Connected Planar Areas in the Selective Laser Melting

This paper studies the practical generation of Voronoi diagrams for multiply-connected planar areas bounded by line segments. The core of the algorithm was calculating Voronoi polygon of every Voronoi object in planar areas independently. The main approach had two steps. The first step was calculating all relevant bisectors of every Voronoi object. The second was combining obtained bisectors into completed Voronoi polygons individually. All code was implemented in Visual C++ platform. The resulting code was extensively tested in real-world data and its practical running time grew only linearly. Three statistical CPU-consumption charts had been drawn with the Voronoi diagrams computation data, and compared with other published codes for computing Voronoi diagrams. The algorithm was applied to compute offsetting of slice area consisting of large-scale line segments for the selective laser melting (SLM) trajectory scanning technology which is a kind of rapid prototyping (RP). The experimental results of offsetting for slice area based on Voronoi diagrams show that the approach is effective and simple for polygon offsetting problems. The method is helpful to those offsetting work and can provide more effective offsetting solution.     

Fine-mapping of SRT7 for short roots and identification of its candidate in rice

Three allelic short root mutants were identified by screening mutants with defective root elongation of the rice japonica cultivar Nipponbare mutant library generated via 60 Co γ-ray irradiation mutagenesis. These mutants, designated srt7-1 (short root 7-1), srt7-2 and srt7-3, respectively, had an extremely short seminal root, adventitious roots and lateral roots. Histological observation revealed the cell length of srt7 mutant roots was significantly shorter than that of wild-type roots. Genetic analysis i...     

Effects of electromagnetic field and lubricate condition on the surface quality of magnesium alloy billet during LFEC processing

The microstructures of the magnesium billets could be improved markedly by low-frequency electromagnetic casting(LFEC)processing.In fact,the low-frequency electromagnetic field(LFEF)also has favorite effect on the surface quality of billet.However,few public reports on the surface quality of LFEC magnesium billets could be found.Therefore,a new crystallizer with a metal internal sleeve together with a kind of lubricant was designed aiming at lowing surface turning quantity,and the effects of casting velocit...     

Net-shape forming of composite packages with high thermal conductivity

The continuing miniaturization of electronic devices in microelectronics and semiconductors drives the development of new packaging materials with enhanced thermal conductivity to dissipate the heat generated in electronic packages.In recent years,several promising composite materials with high thermal conductivity have been developed successfully for high performance electronic equipment to replace the traditional Kovar and Cu/W or Cu/Mo alloys,such as SiCp/Al,SICp/Cu,diamond/Al and diamond/Cu.However,thes...     

Rapid Manufacturing of Sand Molds by Direct Milling

Direct milling of sand molds is an important development in rapid manufacturing of sand molds. Direct milling is an effective method for manufacturing single or small batches of cast parts. This paper describes experimental investigations to find sand blocks with the appropriate strength, to describe wear patterns of different tools (high-speed steel (HSS), carbide, and polycrystalline diamond (PCD) tools), and to analyze sand mold cutting mechanisms. The results show that the PCD tool outperformes the other tools in terms of tool life. Average flank wear and micro-tipping are the dominant tool failure modes in the sand mold milling process. With a flank wear limit of 0.3 mm, the PCD tool works continuously for about 70 h under the experimental conditions. The experimental results show that the cutting mechanism for direct milling sand molds differs from metal cutting.     

藏药五脉绿绒蒿化学成份的研究Ⅰ

本文报道从藏药五脉绿绒蒿中分到的3个化合物,经光谱方法证明它们是5.5’—双氧甲基呋喃醛(1),2—羟乙酰基—呋喃(2),mecambridine(3)。(1)和(2)以前在绿城蒿属植物中没有发现过。     

ME4ET:一个基于EDOC ER模型的模型转换工具

模型驱动体系结构（MDA）是一个以模型和元数据为中心的软件体系结构．在MDA体系中，抽象模型是软件开发的主要产品．与传统的软件开发过程相比，模型转换，特别是平台无关模型和平台相关模型之间的转换，在MDA体系中具有重要作用．模型转换需要自动化的模型转换工具的支持以减少软件开发的成本．介绍一个MDA模型转换工具——ME4ET．陔上具支持EDOC ER模型的建模，并支持将EDOC ER模型自动转换为数据库平台和EJB平台上具体的实现，主要介绍ME4ET工具的模型转换规则和算法．     

Comparative analysis of A,B,C and D genomes in the genus Oryza with C_0t-1 DNA of C genome

The genus Oryza includes two cultivated species, O. sativa L. and O. glaberrima Steud. and comprises more than 20 species[1]. The genomes of Oryza are classified into 10 types: AA, BB, CC, BBCC, CCDD, EE, FF, GG, HHJJ and HHKK[2,3]. Morphological variatio…     

低碳钢过冷奥氏体形变过程组织演变机制

低碳钢过冷奥氏体形变过程将发生形变强化相变及铁素体的动态再结晶,导致晶粒超细化.与未形变的过冷奥氏体等温转变相比,形变极大地促进了奥氏体向铁素体的转变,使铁素体形核率急剧升高,铁素体晶粒尺寸显著降低.形变强化相变是一以形核为主的过程.在形变后期,当形变强化相变铁素体转变基本完成后,将发生铁素体的动态回复和动态再结晶.比较不同应变速率对组织演变影响的结果表明,应变速率较低条件下,易形成铁素体与第2组织层状分布的条带特征;应变速率较高时,组织的条带特征不显著.     

API P105油管钢在含CO2溶液中的电化学腐蚀行为

用电化学阻抗谱(EIS)和极化测量,研究了在含CO2的溶液中NaCl含量对API P105钢的电化学腐蚀行为的影响.结果表明,随着NaCl含量的增大,P105钢的腐蚀电位正移,抑制了腐蚀过程的阴阳极反应,降低了P105钢的腐蚀速率.分析表明,Cl在API P105钢表面的吸附为Temkin等温吸附.